Vision Plus
The VisionPlus is a powerful electronic solution for visualization (from 6.5″ up to 10.4″ color displays) in off-highway industries that rely on their equipment to function under the most difficult conditions. It is part of a complete and compatible product family and is protected by a robust housing suited to the off-highway industry.
Features:
- MPC 823 E, 66 MHz, 64 MB Flash, 32 MB RAM, RTC
- 2 x serial EEPROM 32 kB over I2C (+ 1 x 32 kB EEPROM or 8 kB FRAM opt.)
- 1 x TTP bus with redundant channels, RS-485 physical layer (up to 5 Mbit/s)
- TTP communication controller AS 8202 NF
- 1 x RS-232 Modem (incl. handshake signal lines)
- 2 x RS-485 or 1 x RS-485 + 1 x RS-232
- 1 x LIN (up to 19 200 bit/s)
- 1 x CAN HS + 1 x CAN HS or opt. LS (fault-tolerant)
- 1 x Ethernet following IEEE 802.3 (10 Mbit/s)
- 1 x 1-Wire (i-Button) Interface
- 26 x digital IN (active, low or high), some with possibility of resolver input or edge-detection capability
- 24 x digital OUT 500 mA, short to ground protection and open load detection
- LVDS and PAL/NTSC interface with many LCDs:
• 6.5″ TFT 400 x 240 (- 40 °C to + 80 °C)
• 7″ TFT 16:9 480 x 240 (- 30 °C to + 85 °C)
• 10.4″ TFT 640 x 480 (- 20 °C to + 70 °C) - Touch panel for all displays available over RS-232
- External and on-board temperature sensor
- Software: embedded Linux, C/C++, Microwindows, Engenuity VAPS, CoDeSys® 2.3
Data Sheets: